General Information - Elma Modulgrav Operating Instructions Manual

1.

General Information

This engraving device of the type Modulgrav was manufactured in Germany by using high-
quality material and state-of-the-art technology and was thoroughly tested before being
shipped out.
ATTENTION:
The operating staff must have access to these operating instructions at any time.
The instructions concerning maintenance and the information regarding the verification of
safety functions specified in these operating instructions must always be observed,
otherwise there is no warranty claim and a proper functioning of the machine cannot be
guaranteed.
Remodelling and changing the device is only permitted after consulting the manufacturer.
For service questions and technical information, our technical support office can be
reached during normal business hours at [+49] 7731-882-120.
Address:
Fa. ELMA Hans Schmidbauer
GmbH & Co.KG
Kolpingstr. 1 - 7
D-78224 Singen / Htwl.
GERMANY
Phone:
Fax:
mbC:\DB-pdf\BedAnl\Modulgrav\-GB-300102.doc
[+49] 7731-882-0
[+49] 7731-882-266 or 7731-882-114
Quality from Tradition; Technology of Tomorrow
3