7. Proper Care
The device is composed of high-quality material and components.
-
-
Avoid dirt accumulation on the engraving device by cleaning it regularly, or its
functioning may be impaired.
Do not use any scratching or scraping tools for cleaning the device.
-
8.
Maintenance / Service
Note:
The fixing screws of the table top may not be loosened since the table top is specifically
-
set for this device, loosening the screws will impair the engraving result.
-
No changes may be made to the settings of the linear guides.
Performing changes to the linear guides will void your guarantee or warranty claim.
-
If you require help from our technical support office, contact our service department in
-
writing specifying the defect or problem in detail.
mbC:\DB-pdf\BedAnl\Modulgrav\-GB-300102.doc
Quality from Tradition; Technology of Tomorrow
22