Installation Dimension; Installing The Unit - Fujitsu ARXG-KHTAP Series Installation Manual

3. 2. Installation dimension

20 or more
150 or
more
20 or more
2500 or more
(When no ceiling)
Provide a service access for maintenance purposes.
(Bottom side)
* The service access necessary for fan units and fi lter maintenance.
(Bottom side)
100 or more

3. 3. Installing the unit

• Carrying and installation of the unit should be performed by a suffi cient number
of people and with suffi cient equipment that is adequate for the weight of the unit.
Performing such work with an insuffi cient number of people or with inadequate
equipment could result in dropping of the unit or personal injury.
• If the job is done with the panel frame only, there is a risk that the unit will come
loose. Please take care.
• When fastening the hangers, make the bolt positions uniform.
En-6
300 or more
AIR
Service access
300 or more
Control box
500 or more
AIR
Service access
Fan unit side
300 or more
WARNING
Confi rm the directions of the air intake and outlet before installing the unit.
The unit takes in air from the evaporator side, and expels it from the fan side.
Unit: mm
3. 3. 1. Position the ceiling hole
Hanging bolt installation diagram.
(Top side)
Unit: mm
Model
Unit: mm
12/14
18/22/24/30
36/45/54
(Right side)
3. 3. 2. Body installation
Bolt Strength
CAUTION
750
700
630
Dimension (mm)
A B
700 740
1000 1040
1400 1440
Special nut A
(Accessory)
Hanging bolt M10
(Locally purchased)
Washer
(Accessory)
Special nut B
(Accessory)
Hanger
9.81 to 14.71 N·m (100 to 150 kgf·cm)
Unit: mm
C
800
1100
1500