Chapter 8 Instrument Settings; Overview; Instrument Settings Screen; Software Update - Thermo Scientific Invitrogen Countess II FL User Manual

8

Overview

Instrument
settings screen

Software update

Guidelines for
software update
50
To access the Instrument Settings screen, press the Instrument Settings
the Home page ("Turn ON the instrument" on page 13).
In the Instrument Settings screen, you can:
• perform software update ("Software update" on page 50)
• set the date and time ("Date/Time" on page 52)
• change or install EVOS
• The USB drive used for transferring the software update file must be FAT32
formatted; verify this before proceeding. If necessary, reformat the USB drive to
FAT32 following the recommended procedure for your operating system.
Note: Reformatting the USB drive will result in the loss of all files. Back up the
files in the USB drive prior to reformatting.
• The software update file must be saved on the top level of the USB drive, not
within a folder or a subfolder.
• The software update file must be uncorrupted during transfer. Do not rename,
zip, or compress the software update file.
Instrument settings
™ light cube ("Change light cube" on page 54)
Countess II FL automated cell counter User Guide
™
button on