Moving Recorded Tracks; To Release A Group Setting - Sony MZ-R910 Operating Instructions Manual

5
Turn the control repeatedly until the
number or name of the desired first
track flashes in the display, and then
press x to enter.
6
Turn the control repeatedly until the
number or name of the desired last track
flashes in the display, and then press x
to enter.
7
Follow steps 5 to 7 of "On the remote
control" (page 20) in "Labeling
recordings" to label a group.
Notes
• In step 5, the first track must be either the first
track of an existing group or a track that does
not belong to a group.
• When selecting the last track in step 4, make
sure the track comes after the one selected in
step 5. The last track must be either the last
track of an existing group or a track that does
not belong to a group.
To release a group
setting
See the illustrations in English text (page 55).
On the recorder
1
Press GROUP for 2 seconds or more to
turn the group mode on.
2
Play a group that you want to release
and check the contents ("Selecting and
playing groups (Group Skip Mode)"
(page 14)).
3
Press x.
4
Press the jog dial.
5
Turn the jog dial until "EDIT" flashes in
the display, and then press to enter.
6
Turn the jog dial until "
flashes in the display, and press to enter.
"Release?" and "PushENTER" appear
in the display.
7
Press the jog dial to enter.
The group setting of the selected group
is released.
On the remote control
1
2
3
4
5
6
7

Moving recorded tracks

See the illustrations in English text (page 56).
You can change the order of the recorded
tracks.
On the recorder
1
2
3
: Release"
4
5
Follow the procedure of "To activate the
group mode" (page 10) to turn the group
mode on.
Play a group that you want to release
and check the contents (see "Selecting
and playing groups (Group Skip Mode)"
(page 14)).
Press x.
Press DISPLAY for 2 seconds or more.
Turn the control repeatedly until
"EDIT" flashes in the display, and then
press x to enter.
Turn the control repeatedly until
"GPRelease" flashes in the display, and
then press x to enter.
Press x to enter.
While playing the track you want to
move, press the jog dial.
Turn the jog dial until "EDIT" flashes in
the display, and then press to enter.
Turn the jog dial until "
flashes in the display, and then press to
enter.
The selected track number or name of
the group that the selected track belongs
flashes in the display. If the track has
been labeled, press > to make the
track name appear in the display. Press
. to display the track number again.
Turn the jog dial until the destination
track number flashes in the display.
Press the jog dial to enter.
The track moves to the selected
destination track.
: Move"
25