Sicce XSTREAM Series Manual

Sicce XSTREAM Series Manual

Circulation and stream pump

Advertisement

CIRCULATION AND STREAM PUMP
Thank you for choosing the SICCE XSTREAM series pump, the latest generation of stream pumps
for saltwater and freshwarter aquariums. XSTREAM, designed and made in Italy to rigorous quality
standards on components and production, is a technically advanced pump for high performance,
long lasting reliability, low operating costs and user-friendly maintenance. The pump's rotating
engine allows for a wide adjustable flow up to 360˚. The strong magnet holders guarantee secure
holding even on dirty glass. The XSTREAM-e with Electronic Mini-Controller and pre-set timing
programs with flow control, will satisfy the expectations of the most demanding customer.

TECHNICAL DATA

XStream
Tank Capacity - SW
Tank Capacity - FW
Max Flow Rate
Watts
Cord Length
XStream
XStream/XStream-e
3500
up to 70 gal
up to 105 gal
925 gph
4 W
7.2 ft
Dimensions:
2.08" X 2.75" X 2.44"
5000
up to 90 gal
up to 120 gal
up to 130 gal
up to 200 gal up to 250 gal
1320 gph
1720 gph
6 W
7.2 ft
6500
8000
up to 150 gal
2120 gph
9.5 W
14 W
7.2 ft
7.2 ft
© 2014 SICCE All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XSTREAM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Sicce XSTREAM Series

  • Page 1: Technical Data

    CIRCULATION AND STREAM PUMP XStream/XStream-e Thank you for choosing the SICCE XSTREAM series pump, the latest generation of stream pumps for saltwater and freshwarter aquariums. XSTREAM, designed and made in Italy to rigorous quality standards on components and production, is a technically advanced pump for high performance, long lasting reliability, low operating costs and user-friendly maintenance.
  • Page 2 TECHNICAL DRAWING COMPONENTS 3.2 Rotating System 1 External Magnet Holder 4 Pump cover 2 Internal Magnet Holder 5 Pump Body 3 Shaft holder 6 Rotor Kit 3.1 O ring 7 Prefilter grid INSTALLATION To install XSTREAM Pump proceed as follows: 1) Check the pump for damage.
  • Page 3 If the O-ring is not properly seated the rotor may make noise. Replace a lost or damaged O-ring. SICCE products are designed for a long life andhigh, reliable service. Nevertheless, wear over time can create a little noise even after regular maintenance. Replacement parts are available.
  • Page 4 Handle the Mini Controller with dry hands. The Mini Controller can be used only with the Sicce XSTREAM-E and can be powered only by the included transformer. Any other use could damage this electronic device and void the warranty.
  • Page 5 HOW TO SET UP XSTREAM-E The Mini Controller works by pressing the arrows for at least 1 second. If the touch is too fast, the Mini Controller will not sense the input given. Press the arrows to move along the desired pre-set timing program.
  • Page 6 FIND OUT HOW TO GET YOUR PRODUCT GUARANTEED FOR 5 YEARS To improve our service and our clients’ satisfaction, SICCE offers the possibility of adding a 2 year extension to the warranty by simply registering your product on our website www.sicce.com in “Sicce for you/Product registration”...

This manual is also suitable for:

Xstream 3500Xstream 5000Xstream 6500Xstream 8000

Table of Contents