Mounting; Tabletop Mounting; Under-The-Table Mounting - Extron electronics XTP PI 400 User Manual

Four port xtp power injector
Table of Contents

Advertisement

Mounting

The XTP PI 400 is 1U high and one half rack wide. To mount the device:
1.
2.
ATTENTION:
WARNING: Risk of electrical shock. To reduce the risk of fire or electric shock, do
AVERTISSEMENT: Risque de choc électrique: Afin de réduire les risques d'incendie

Tabletop Mounting

Attach the provided rubber feet to the bottom four corners of the enclosure.

Under-the-table Mounting

Use an optional Extron mounting kit to mount the XTP PI 400 under a desk or table. Follow
the instructions included with the kit.
Turn off or disconnect all equipment power sources.
Mount the XTP PI 400 on a table, under a desk using an optional mounting kit, or on a
rack shelf (see the sections below for each mounting option).
These power supplies are not suitable for use in air handling spaces or in wall
cavities. The power supply is to be located within the vicinity of the Extron AV
equipment in an ordinary location with IEC 1010 pollution degree 2, and secured
to an equipment rack within a dedicated closet, podium, or desk.
Ces sources d'alimentation ne sont pas appropriées pour une utilisation dans
les espaces d'aération ou dans les cavités murales. Cette source d'alimentation
doit être située à proximité de l'équipement audiovisuel d'Extron, dans un endroit
ordinaire avec une pollution IEC 1010 degré 2, et fixé à un équipement de rack au
sein d'un placard, d'une estrade ou d'un bureau qui lui est dédié.
The installation must always be in accordance with the applicable provisions of
National Electrical Code ANSI/NFPA 70, article 725 and the Canadian Electrical
Code part 1, section 16. The power supply shall not be permanently fixed to
building structure or similar structure.
Cette installation doit toujours être en accord avec les mesures qui s'applique
au National Electrical Code ANSI/NFPA 70, article 725, et au Canadian Electrical
Code, partie 1, section 16. La source d'alimentation ne devra pas être fixée de
façon permanente à une structure de bâtiment ou à une structure similaire.
This device is for intra-building use only.
Cet appareil est exclusivement réservé à un usage intérieur.
not expose this apparatus to rain, moisture, dripping, splashing, or objects filled with
liquids.
ou de choc électrique, protégez cet appareil de la pluie ou de l'humidité. Cet appareil
doit être conservé à l'abri des éclaboussures et des projections, et aucun objet
contenant un liquide, tel qu'un vase, ne doit être posé sur l'appareil.
XTP PI 400 Power Injector • Mounting
9

Advertisement

Table of Contents
loading

Table of Contents