Bissell 1200 User Manual page 14

Troubleshooting Continued
Cleaner will not run
Possible Causes
Power cord not plugged in.
1
Blown fuse/tripped breaker.
2
Hose not removed from receiver.
3
Unusual or Odd Noise
Possible Causes
Clean/Solution tank is out of fluid.
1
Reduced or No Spray
Possible Causes
Spray Tip clogged on Tough Stain Brush.
1
Clean/Solution tank is out of fluid.
2
Clean/Solution tank is not inserted
3
into the unit securely.
No Suction
Possible Causes
Tank is full.
1
Dirty/Collection tank latch is not down.
2
Black Valve on the Dirty/Collection
3
Tank is missing.
14
ug203-6650_1200_805.indd 14 ug203-6650_1200_805.indd 14
Manual/Hose Cleaning
Remedies
Check electrical plug.
1
Replace household fuse or
2
reset breaker.
Remove Hose.
3
Remedies
Fill Clean Solution Tank.
1
Remedies
Clean Spray Tip.
1
Fill Clean/Solution Tank.
2
Gently press the Clean/Solution
3
Tank until you see "bubbles"
coming from the base of
the tank.
Remedies
Empty tank.
1
Push latch down, securely
2
into place.
Replace Black Valve into Dirty/
3
Collection tank.
11/1/05 11:44:32 AM 11/1/05 11:44:32 AM