Bissell 1200 User Manual page 12

Storage
Unplug the Power Cord from the outlet. Wrap
1.
Power Cord around the cord wrap.
Empty and rinse the Dirty/Collection Tank after
2.
each use, or when dirty water reaches the
indicated maximum fill line. To remove the tank, lift
up the Dirty Tank latch and pull the tank out. Dump
out the dirty water and rinse with clean. Replace
the tank into the unit for storage.
After using the SpotBot's Handsfree feature, wipe
the window and brushing area with a soft cloth.
If you were using your SpotBot manually, wrap
3.
the Vacuum Flex Hose around the unit and secure
the Spray Trigger into the receiver on the front of
the unit.
Store unit indoors at room temperature
4.
(40° to 110°F).
12
ug203-6650_1200_805.indd 12 ug203-6650_1200_805.indd 12
Tip:
If a significant amount of
water and solution(s) remain
in the clean tank, your unit
can be stored with liquid in
the clean tank. However, if
you have added Oxy GEN2
into the clean tank, fresh
Oxy GEN2 should be added
prior to the next use to
optimize performance.
2.
Tip:
Clean out the Black Valve
periodically inside of the
Dirty/Collection Tank.
11/1/05 11:44:31 AM 11/1/05 11:44:31 AM
3.