Important Safety Instructions For Battery Charger - Hitachi Koki metabo HPT RP 3608DA Safety Instructions And Instruction Manual

7. Make a thorough inspection if using the
cleaner to clean viscous powder or dust
particles.
Powder or dust particles might be suctioned
in and adhere internally, causing the vanes to
break or injuries to occur.
8. Do not leave on locations such as benches
or fl oors while still rotating.
Injuries might occur.
9. ALWAYS wear ear protectors when using
the cleaner for extended periods.
Prolonged exposure to high intensity
noise can cause hearing loss.
10. When working at elevated locations, clear
the area of all other people and be aware of
conditions below you.
11. NEVER touch moving parts.
NEVER place your hands, fi ngers or other
body parts near the cleaner's moving parts.
12. NEVER use a cleaner for applications other
than those specifi ed.
NEVER use a cleaner for applications other
than those specifi ed in the Instruction Manual.
13. Handle cleaner correctly.
Operate the cleaner according to the
instructions provided herein. Do not drop or
throw the cleaner. NEVER allow the cleaner to
be operated by children, individuals unfamiliar
with its operation or unauthorized personnel.
14. Keep all screws, bolts and covers tightly in
place.
Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
15. Do not use cleaner if the plastic housing or
handle is cracked.
Cracks in the cleaner's housing or handle can
lead to electric shock. Such cleaner should not
be used until repaired.
16. NEVER use a cleaner which is defective or
operating abnormally.
If the cleaner appears to be operating
unusually, making strange noises, or otherwise
appears defective, stop using it immediately
and arrange for repairs by a metabo HPT
authorized service center.
17. Carefully handle cleaner.
Should a cleaner be dropped or struck
against hard materials inadvertently, it may be
deformed, cracked, or damaged.
18. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine,
carbon tetrachloride, and alcohol may damage
and crack plastic parts. Do not wipe them with
such solvents.
Wipe plastic parts with a soft cloth lightly
dampened with soapy water and dry
thoroughly.
19. ALWAYS wear eye protection that meets the
requirement of the latest revision of
ANSI Standard Z87.1.
20. Do not use the product if the tool or the battery
terminals (battery mount) are deformed.
Installing the battery could cause a short circuit
that could result in smoke emission or ignition.
21. Keep the tool's terminals (battery mount) free
of swarf and dust.
○ Prior to use, make sure that swarf and dust
have not collected in the area of the terminals.
○ During use, try to avoid swarf or dust on the tool
from falling on the battery.
○ When suspending operation or after use, do
not leave the tool in an area where it may be
exposed to falling swarf or dust.
Doing so could cause a short circuit that could
result in smoke emission or ignition.
22. Defi nitions for symbols used on this cleaner
V ............. volts
— ........... direct current
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CHARGER
WARNING
Death or serious bodily injury could result
from improper or unsafe use of battery
chargers. To avoid these risks, follow
these basic safety instructions:
READ ALL INSTRUCTIONS
1. This manual contains important safety and
operating instructions for battery charger
Model UC18YSL3.
2. Before using battery charger, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
English
5