Your ClassFlow Connect is designed and tested to meet the
latest standards of safety for information technology equipment.
However, to ensure your safety, it is important that you read the
following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before
•
you operate your system.
Do not use this product near water or a heat source such as
•
a radiator.
Openings on the chassis are for ventilation. Do not block or
•
cover these openings. Make sure you leave plenty of space
around the system for ventilation. Never insert objects of any
kind into the ventilation openings.
Use this product in environments with ambient temperatures
•
between 0°C and 40°C (32°F and 104°F).
IF YOU USE AN EXTENSION CORD, PLEASE USE THE UL LISTED
CORD AND MAKE SURE THAT THE TOTAL AMPERE RATING OF
THE DEVICES PLUGGED INTO THE EXTENSION CORD DOES NOT
EXCEED ITS AMPERE RATING.
Care during use
Do not walk on the power cord or allow anything to rest on it.
•
Do not spill water or any other liquids on your system.
•
When the system is turned off, a small amount of electrical
•
current still flows. Always unplug all power, modem, and
network cables from the power outlets before cleaning the
system.
4
ClassFlow Connect Installation & User Guide
Safety Information
Need help?
Do you have a question about the ClassFlow Connect and is the answer not in the manual?