1. Manuals
  2. Brands
  3. nekos Manuals
  4. Controller
  5. SKY 450
  6. Instruction manual

nekos SKY 450 Instruction Manual

Rack actuator, force 450n - strokes 180, 230, 350, 550, 750, 1000 mm, electrical feeding 110-230v~ 50/60hz
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
SKY 450
INSTRUCTION MANUAL
RACK ACTUATOR
EN
Force 450N – Strokes 180, 230, 350, 550, 750, 1000 mm
Electrical feeding 110-230V~ 50/60Hz
NEKOS S.r.l. - Via Capitoni, 7/5 - 36064 Mason Vicentino (VI) – ITALY
+39 0424 411011 –  +39 0424 411013 - www.nekos.it - info@nekos.it
4420044 - Rev 1805
USER INSTRUCTIONS
CAUTION.
Carefully
observe
instructions to ensure personal safety.
The device is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lacking
experience and knowledge. Do not allow children to play with the
fixed controls and keep any remote-control units out of their reach.
Have installation checks performed periodically by qualified
personnel from a service centre authorised by the manufacturer. Do
not use if repair or adjustment is required.
CAUTION: if the power cable is damaged, it must be replaced by
qualified personnel from a service centre authorised by the
manufacturer.
CAUTION. Disconnect the power supply during cleaning or
maintenance operations. Do not use solvents or jets of water to
wash the appliance; the appliance should not be submerged in
water.
In the event of fault or malfunction, switch off the device at the main
switch. All repairs and adjustments (e.g. setting the stroke) must
only be performed by qualified personnel from a service centre
authorised by the manufacturer.
Always request exclusive use of original spare parts. Failure to
respect this condition could compromise safety and invalidate the
benefits contained in the warranty for the appliance. In the event of
any problems or queries, consult your agent or contact the
manufacturer directly.
The A-weighted sound pressure level is less than 70dB(A).
Carefully preserve these instructions after installation.
all
the
following
installation
2

Advertisement

Table of Contents
loading

Related Manuals for nekos SKY 450

Summary of Contents for nekos SKY 450

  • Page 1 The A-weighted sound pressure level is less than 70dB(A). NEKOS S.r.l. - Via Capitoni, 7/5 - 36064 Mason Vicentino (VI) – ITALY Carefully preserve these instructions after installation. +39 0424 411011 –  +39 0424 411013 - www.nekos.it - info@nekos.it...

  • Page 2: Table Of Contents

    ENSURE PERSONAL SAFETY MPROPER INSTALLATION CAN SERIOUSLY ENDANGER SAFETY nekos products have been manufactured in accordance with safety standards and conforms to the stipulations of current standards in force. MANDATORY RISK ANALYSIS AND PROTECTION MEASURES When correctly assembled, installed and used according to the present instructions, they will not The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), generate any danger for persons, animals or items.

  • Page 3: Formulas And Recommendations For Installation

    F (Kg) = Force for opening or closing P (Kg) = Weight of the window (mobile sash only) Model SKY 450 C (cm) = Opening stroke (actuator stroke) H (cm) = Height of the mobile sash Thrust and traction force (F...

  • Page 4: Construction And Standards

    The plate data is displayed on an adhesive label placed on the outside of the casing, Instructions for assembly which must remain intact and visible. The main information it displays includes: manufacturer's address, product name - These indications are for specialised technical personnel and basic work and model number, technical characteristics, production date and serial number.

  • Page 5: Assembly On Light Domes Or Dormer Windows

    fixed part of the frame and trace in the three openings for D. Place the front rod in line with the centre line of the mobile fixing (Fig. 4). part of the window frame and trace out the three fixing openings (Fig.

  • Page 6: Assembly In Tandem With Connection Bar

    H. Use an appropriate size of drill head for perforation, insert the screws and fix the H. Manually move the actuator along its axis to close the window correctly and firmly motor support bracket to the casement. against the seals. Tighten the clamp screws right in and align the actuator with the casement.

  • Page 7: Checking For Correct Assembly

    1. Remove the four screws on the front head of the actuator. The device is mainly made from the following materials: aluminium, zinc, iron, plastic of various type, cuprum. Dispose materials in conformity with local regulations about 2. Remove the body of the actuator and the rack from the rod. removal.

  • Page 8: Declaration Of Conformity

    Questa dichiarazione è fatta dal costruttore / This is declared by the manufacturer : NEKOS S.r.l. - Via Capitoni, 7/5 NEKOS S.r.l. - Via Capitoni 7/5- 36064 Mason Vicentino (Vicenza) - Italy 36064 Mason Vicentino (VI) – ITALY Rappresentato da / Represented by : +39 0424 411011 –...

Table of Contents