Page 1
KIMO When correctly assembled, installed and used according to the present instructions, they will not generate any danger for persons, animals or items.
EEP THESE INSTRUCTIONS AFTER INSTALLATION Contents MANDATORY RISK ANALYSIS AND PROTECTION MEASURES The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Security rules ........................ 4 Standard IEC 60335-2-103 (Particular requirements for drives for gates, doors and Technical operating information ..................5 windows) and other directives and regulations indicated in the attached Declarations Formulas and recommendations for installation ............
The brackets are fixed to the frame during actuator assembly with just two screws. Combined with the BK-LOCK INTENDED USE The KIMO chain actuator is designed and built to open product and perimeter fittings, it constitutes the security lock that keeps the window and close top-hung windows opening outwards, bottom-hung windows or closed tight and guarantees a high thermal K.
2 support brackets 7. Electric power supply 2 half-brackets for attach to the frame, complete with The KIMO actuator is powered with a voltage of 24V SELV. The power supply cable has three conductors: the first conductor B “1”...
9.1. Preparation for mounting the actuator Before beginning to mount the actuator, depending on the type of application, the window frame must be prepared by carrying out the following operations: 9.2. Recessed mounting For harness, please follow this diagram: For recessed mounting, the window frame must be prepared by milling and making two holes as indicated in the diagram below.
the lock moves in the opening direction; the lock arrives at stroke-end, stop; the chain actuator begins opening, opening the movable sash; the KIMO chain actuator reaches stroke-end. The actuator is factory-set with the longest stroke (210 mm).
11.2. Sound diagnostics in case of anomaly Problem Possible cause Solution Check status of circuit No electricity at feeder The lock is set in "with actuator" mode but does not receive any breaker or safety switch 1 Beep commands from the actuator.
Page 8
- KATO 305 SYNCRO INKA 356 - INKA 356 SYNCRO Modello: Type : 24 V : KATO 253 - KATO - KIMO - KATO 305 KATO SYNCRO - KATO 305 SYNCRO INKA 356 - INKA 356 SYNCRO Anno di costruzione dal / Year of manufacturing from: 2017 Soddisfano gli applicabili requisiti essenziali della Direttiva Macchine 2006/42/EC, Allegato I Fulfil the essential requirements of the Machinery Directive 2006/42/EC, Annex I, Art.