15) Server room control
Switches between normal control and server room control.
NOTE: To use this function, address setting of the primary unit and secondary unit needs to be
done.
Function number
96
When performing server room control, mind the followings:
• Set to "01" on one of the 2 indoor units, and set to "02" on the other indoor unit.
• As for the function details and setup procedure, refer to
Setting value
00
01
Server room control (Primary unit)
02
Server room control (Secondary unit)
- 53 -
Setting description
Normal control
"Details of server room control"
Factory setting
♦
on page 4.