High Power Wireless Link Indoor Transceiver Leds And Connectors - Pentair HIGH POWER WIRELESS LINK KIT Installation Manual

High Power Wireless Link Indoor Transceiver LEDs and Connectors

Indoor Transceiver LEDs
PWR: Green LED on: Power is on to the unit.
RX: Yellow LED indicates the unit is receiving data.
TX: Green LED indicates the unit is transmitting data.
Ethernet Port
RS-485 Connector
(to Protocol Adapter,
ScreenLogic only)
IMPORTANT NOTICE: Be sure the
yellow ID label (8-digit ID number
XXXXXXXX) located on the front side
of the Indoor transceiver and the ID
number on the outdoor transceiver
circuit board are the same.
High Power Wireless
2.16 in
High Power
Wireless Indoor
Transceiver and
base
Power Plug
socket
ID number
(Outdoor transceiver)
High Power Wireless Link Kit Installation Guide
1.75 in
HIGH POWER
WIRELESS LINK
Keep this side
clear of ALL
metal objects for
2 ft. (61 cm)
Model: HPW-WETHLINK
HVIN: HPW-WETHLINK
FCC ID: 2AHWAQTSHPWETH
ISED: 21176-QTSHPWETH
RS-485 Connector
(to Protocol Adapter,
ScreenLogic only)
5