Table of Contents
Advertisement
4
High Power Wireless Link Kit Overview
The High Power Wireless Link consists of an indoor and outdoor
902-928 MHz wireless transceiver. Note: The wireless transceivers ship
from the factory as a matched pair. The ID numbers on each transceiver
must be the same number to function correctly. If needed, the transceivers
must be replaced as a matched pair. For more information, call Customer
Support 800.831.7133.
Automation Control System: The High Power Wireless Link indoor and
outdoor transceiver provide a wireless connection between the Internet
and the IntelliCenter™, IntelliTouch
Center (or Power Center) located at the equipment pad which eliminates
hard wire connection from inside your home to the equipment pad.
Installation Guide
This Installation Guide provides installation instructions for the High Power
Wireless Link kit. For information about ScreenLogic Interface operation, refer
to the ScreenLogic Interface User's Guide (P/N 520493).
High Power Wireless Link Kit Contents
The following items show are included in the kit:
Note:
ScreenLogic Interface Protocol Adapter and Cable (purchased separately)
Power Over Ethernet Module
(Outdoor hardware)
Outdoor Transceiver
(Cable Restrainer)
High Power Wireless
Link PoE/Ethernet Cable
Bundle (P/N 544425)
Indoor transceiver
and base
AC Power Adapter
High Power Wireless Link Kit Installation Guide
®
Ethernet Cable
(15 ft.)
High Power Wireless Link Kit
®
or EasyTouch
Control System Load
Manual
NOTE (*): ID numbers
on Indoor and Outdoor
transceiver board must
match
Mounting hardware
(screws)
Outdoor Cable
(white - 15 ft.)
Cable (for connection to
ScreenLogic
Interface
®
Protocol Adapter
(purchased separately)
Outdoor
Transceiver
enclosure
Hide quick links:
Advertisement
Table of Contents
