Installation - ABB DCBreak Series Instructions For Installation & Operation

D I S T R I B U T I O N S O L U T I O N S
—
7.

Installation

7.1. General information
7.2. Recommendations used in
It is absolutely essential to comply with the
following recommendations when mentioned in the
text.
Correct installation is of primary
importance. The manufacturer's instructions
must be carefully studied and followed. It is
good practice to wear gloves, protection for
the eyes, head and lower limbs when
handling the components during the
installation work.
this manual
DANGER! Failure to comply with the tasks or
procedures highlighted by this symbol could
result in personal injuries!
IMPORTANT! Failure to comply with the
tasks or procedures highlighted by this
symbol could result in material damage or
faulty operation!
7.3. Staff requirements
DANGER! This document describes the sole
official procedure approved by ABB SpA for
performance of the operations described
below. ABB SpA declines all liability for
failure to comply with the indicated
procedures.
Throughout all operations, e.g. detailed planning,
installation, disassembly, maintenance and putting
into service of the apparatus, the workers are
responsible:
• for correct and adequate execution of the opera-
tions
• for the apparatus and surrounding workplace
• for all persons present in the work area
• for safety, before the restarting and re-connection
operations
The personnel assigned the tasks described above
must be qualified in accordance with the regulations
concerning this type of equipment in force in the
country in which the equipment itself is installed,
and must be familiar with similar types of
apparatus. They must also be able to understand
and comply with the indications in the
corresponding circuit diagram and cable
specifications during work. A working knowledge of
the local regulations concerning safety for electrical
installations and monitoring systems is also
required.
All work on the apparatus and on the installation to
which it is connected must be performed exclusively
by properly trained personnel, in accordance with
the laws governing safety in the workplace in force
in the various different countries.
11