Disposal - ABB DCBreak Series Instructions For Installation & Operation

D I S T R I B U T I O N S O L U T I O N S
—

10. Disposal

If the apparatus is dismantled, the resulting
materials can be disposed of in different ways
according to their type:
• Stainless steel
• Copper and copper alloy
• Aluminum alloy
• Rubber (gaskets, etc.)
• Sintered material
• Cables
• Electrical components
• Glass-polyester
• Ceramic guides
All materials and components must be dismantled
or recycled in accordance with the laws and
regulations in force in the place of installation.
To ensure a high quality Customer Service,
compliance with the following ABB SpA provisions
and directives and, thus, the Quality Control
regulations, is mandatory. This requirement applies
to all cases of damage or repair, without exception.
25