Setup; Setup Operation; General Setup; Radio Setup - Alpine iLX-F259 Owner's Manual

Setup

Setup Operation

To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Release the parking brake. (For safety, release the parking
brake while depressing the foot brake pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the Setup operation has been released.
Engaging the parking brake can reactivate the Setup Menu, as long as
the car's ignition has not been turned off. It is not necessary to repeat
the above procedure (1 through 3).
Each time the ignition is turned OFF, perform the above procedure.
1
Touch the (HOME) button.
The HOME screen is displayed.
2
Touch [Settings].
The Settings menu screen is displayed.
3
Touch the required setting genre on the upper part of
the Settings menu screen, and then touch the setting
item.
Setting genres:
General: See "General Setup" (page 12).
Connection: See "Connection (Bluetooth) Setup" (page 16).
Camera: See "Camera Setup" (page 17).
Sound: See "Sound Setup" (page 18).
12
-EN
[Settings] button

General Setup

[General] is selected on the Settings menu screen.
General Setup Menu screen
Setting items:
Radio (page 12)
SiriusXM (page 13)
Language (page 13)
Wallpaper And Theme (page 14)
Screen/LED Customize (page 14)
Clock (page 15)
Display Off (page 15)
About (page 15)
Installation (page 15)

Radio Setup

[Radio] is selected on the General Setup Menu screen.
Setting the TUNER (FM) Tone Quality (Tuner
Condition)
This unit can set your preferred tone quality for FM radio source.
Setting item:
FM Tuner Setting
Setting contents:
Normal (Initial setting) / HiFi / Stable
Normal: Standard setting
HiFi: High-quality setting
Stable: Control noise
• Noise may be more noticeable when [HiFi] is set, depending on the
reception status. In this case, the [Normal] setting is recommended.