Bluetooth Operation; Setup Before Using; About Bluetooth; Bluetooth Setup - Alpine CDE-174BT Owner's Manual

BLUETOOTH Operation

SOURCE/ 
Rotary encoder

/ENTER
/ II


VIEW
AUDIO/SETUP
BAND/ABC SEARCH
* The illustration is for CDE-173BT.

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
Notes
• Depending on the BLUETOOTH version, a BLUETOOTH compatible
device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible devices
is not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the connected
device(s).
• When you search this unit using the BLUETOOTH compatible phone,
the unit name is displayed as "Alpine CD Receiver" (CDE-174BT/
CDE-173BT only)/Alpine Digital Media Receiver (UTE-72BT only)
model name.

Before Using BLUETOOTH Function

Before using the BLUETOOTH function, the following settings need to
be made.
Set "BT IN" to ON when you want to use Hands-Free phone
or BT Audio function. Refer to "Setting the BLUETOOTH
Connection (BT IN)" on page 24.
Note
• Before using BLUETOOTH function, it must be paired with this unit.
Refer to "How to connect to a BLUETOOTH compatible device
(Pairing)" on page 23.

1/
2/
Preset buttons
(1 through 6)
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" (CDE-174BT/CDE-173BT only)/Alpine
Digital Media Receiver (UTE-72BT only) for pairing.
2
Turn the Rotary encoder to change the head unit display
from "PAIR NO" to "PAIR YES".
If "PAIR NO" is selected, the connection will be cancelled.
3
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" (CDE-174BT/CDE-173BT only)/Alpine
Digital Media Receiver (UTE-72BT only) for pairing.
2
Input the PIN code ("0000") in a BLUETOOTH compatible
device.
Note
• The PIN code is fixed as "0000".
3
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
Notes
• If the connection is unsuccessful, "FAILED" is displayed.
• After a successful pairing, the two devices should re-pair automatically
whenever the vehicle's ignition is turned ON. However, the re-pairing
may fail. If the auto re-pairing fails, try to pair manually.
• Set "VISIBLE M" to VISI M ON to enable this unit to be recognised by a
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 24.

BLUETOOTH SETUP

The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
Note
• Set "BT IN" to ON, and then perform BLUETOOTH SETUP operation.
Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 24.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "BLUETOOTH", and then
press ENTER.
The BLUETOOTH setup mode is activated.
23
-EN