Safety Information - Siemens SIMATIC Ident Compact Operating Instructions

Table 3-2 Ordering data accessories for the wide-range power supply unit for SIMATIC RF systems
24 VDC connecting cable
for SIMATIC RF600 readers RF620R/RF630R/RF640R/RF670R
24 VDC connecting cable
for SIMATIC RF600 readers RF650R/RF680R/RF685R
24 VDC connecting cable
for readers of the SIMATIC product family MOBY D
24 VDC connecting cable
for SIMATIC RF200 / RF300 readers with RS-232
24 VDC connecting cable
for SIMATIC RF200 / RF300 readers with open ends at the power
supply unit end
24 VDC connecting cable
for SIMATIC RF200 / RF300 readers with RS-232
M8 plug at the 24 V end, reader plug angled
4

Safety Information

WARNING
Danger to life
It is not permitted to open the device or to modify the device.
The following must also be taken into account:
Failure to observe this requirement shall constitute a revocation of the CE approval, UL certification for the US and
•
Canada as well as the manufacturer's warranty.
For installation of the power supply, compliance with the DIN/VDE requirements or the country-specific regulations is
•
essential.
The area of application of the power supply unit is limited to "Information technology equipment" within the scope of
•
validity of the EN 60950/VDE 0805 standard.
When the equipment is installed, it must be ensured that the mains socket outlet is freely accessible.
•
Within the operating temperature range of the power supply unit, above an ambient temperature of +25 °C, very high
•
temperatures (max. approx. +81.5 °C at an ambient temperature of +70 °C) can occur on the housing due to the
internal heating of the device. In this case, make sure that the housing is covered in order to protect people from
coming into contact with the hot housing. Adequate ventilation of the power supply must be maintained under these
conditions.
Note
Operating range und use of the wide-range power supply unit
The wide-range power supply unit must only be used for SIMATIC products in the specifically described operating range and
for the documented intended use.
NOTICE
Liability
If the wide input range power supply for SIMATIC RF systems is connected to third-party products, the end user is
responsible and liable for operation of the system or end product that includes the wide input range power supply for
SIMATIC RF systems.
Note the conditions specified in the UL approval.
Wide-range power supply unit for SIMATIC RF systems
J31069-D0169-U001-A5-7618, 07/2016
Article number
5 m 6GT2891-0NH50
5 m 6GT2891-0PH50
5 m 6GT2491-1HH50
5 m 6GT2891-4KH50
5 m 6GT2891-4KH50-0AX0
5 m 6GT2891-4KH50-0AX1
3