Frequently Asked Questions - Sony VAIO PCG-GRS150 User Manual

VAIO Computer Quick Start
Power profile Description
LCD Standby Controls the time it takes the system to switch the computer
Timer screen (LCD) to Standby mode when the system is idle. This
setting only turns off power to the computer screen. The system
itself still functions on full power.
HDD Standby Controls the time it takes the system to switch the hard disk
Timer drive to Standby mode when the system is idle. This setting only
turns off power to the hard disk drive.
i.LINK Port Controls the power supply to the i.LINK port. You can disable
power to the i.LINK port to conserve power.
Memory Stick Controls the power supply to the Memory Stick slot. You can
Port Power- disable power to the Memory Stick slot to conserve power.
saving
1 Slows the processor speed.
✍
To activate Hibernate mode, you must first enable the Hibernate mode. See "To
activate Hibernate mode" for more information.

Frequently asked questions

Can my computer enter Hibernate mode while using battery power?
Your computer can enter Hibernate mode while using battery power, but some
software programs and peripheral devices prevent the system from entering
Hibernate mode at all. If you are using a program that prevents the system from
entering Hibernate mode, save your data frequently. See "Using power saving
modes" for information on how you can manually activate Hibernate mode.
When should I replace the battery?
If, after fully charging the battery, the battery power is still low, the battery may
be reaching the end of its life and should be replaced.
28