Removing An Add-In Card - Sony PCV-L630 Computer User Guide (primary manual) Reference Manual

Removing an Add-in Card

!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove the system cover (see
page 24).
2
Disconnect any cables attached to the add-in card.
3
Remove the screw that secures the add-in card to the chassis.
4
Remove the add-in card from the PCI slot connector and store the
card in an anti-static wrapper for future use.
Grasp the card with one hand on each end, and gently pull up as you rock the card
from side to side.
!
Hold the add-in card by its edges and do not touch any components or
connector contacts on the card. Static electricity in your body may
damage sensitive components on the card. As a precaution, touch any
exposed metal part on the metal chassis (preferably the metal part on
the power supply) before handling an add-in card to discharge any static
electricity in your body.
Removing, Installing, and Replacing Components
"Removing the System Cover" on
27
KY0071.VSD