CAUTION!
Risk of injury while drilling!
While drilling, you could inhale dust and possibly wood chips that could harm
yourself and other persons as a result. When drilling, the loud drilling noises
could damage your hearing. Noise may cause hearing loss.
− Wear a dust mask.
− Wear ear plugs.
NOTICE!
Risk of damage!
If the vents on the drill are covered or an unsuitable drill bit and settings are
used for different materials, the drill and the drill bits could be damaged.
− Do not cover the vents.
− If you cover the vents during operation, the accumulation of heat may
damage the drill.
− Only use the enclosed drill bit for metal, wood and plastic.
Inserting tools
1. To clamp in one of the drill bits
bits
11
in the quick-action drill chuck
will open the quick-action drill chuck.
2. Select
• the suitable drill bit and insert it in the quick-action drill chuck.
• the magnetic bit holder with a suitable bit and insert it with the hexagonal
side in the quick-action drill chuck.
3. Turn the quick-action drill chuck clockwise until tight (see Fig. D).
Removing tools
1. Turn the quick-action drill chuck
2. Take the tool out of the quick-action drill chuck and store it properly in the storage
case.
9
or the magnetic bit holder
, turn it anti-clockwise (see Fig. D). This
1
anti-clockwise (see Fig. D).
1
10
with one of the
Use
15