To remove the floppy disk drive
1
Turn off the computer.
There is a RELEASE lever on the bottom of the computer. Slide this lever in
2
the direction of the arrow.
Multipurpose bay release lever
3
Slide the drive out of the multipurpose bay.
4
Insert the weight saver. See "Using the Weight Saver" on page 56.
To reinsert the floppy disk drive
Turn off the computer.
1
2
If another device is in the multipurpose bay, remove the device. See "To
remove the second battery pack" on page 54.
Using the Floppy Disk Drive
Multipurpose RELEASE lever
41