To Install A Memory Module - Sony PCG-F340 Primary User Manual

Typical expansion memory configuration
Total System Memory
(MB)
†
64
80
96
128
192
†
64 MB is the default memory amount.

To install a memory module

1
Shut down your computer and disconnect all peripheral devices,
such as your printer.
2
Unplug your computer and remove the battery packs.
3
Wait until the computer cools down. Then open the internal speaker
cover by unscrewing the left side of the cover.
Turn screw
counter-clockwise.
4
Slide the internal speaker cover to the right, then lift it away from the
computer. Be careful not to detach the cable when lifting the cover.
On-board (MB)
64
64
64
64
64
Slot (MB)
Empty
16
32
64
128
internal
speaker
cover
cable
77