Using Battery Power; Battery Pack - Sony PCG-F340 Primary User Manual

Using Battery Power

You can use one or two battery packs as a source of power. The second
battery pack inserts into the drive bay on the right side of the computer.
(See "Using Power Saving Modes" on page 33.) Additional battery packs
are available as a seperate option.
The battery pack that comes with your computer is not fully charged at
the time of purchase. Follow the steps below to insert and charge the

battery pack.

To insert the battery pack
1
Open the cover of the battery bay.
2
Insert the battery pack into the battery bay on the left side of the
computer.
Battery pack
(supplied)
3
Close the cover of the battery bay until it clicks.
When attaching your computer to the port replicator, do not attempt to insert or remove the
battery pack. Lifting and turning the computer with an attached docking station could
cause a temporary loss of power.
Connecting a Power Source
Label side facing down
9