Ricoh GR III Operating Manual page 53

e_kb588_om.indb 51
Bulb, Time, and Bulb Timer -------------------------------------------------------------------------------
• In N mode, [B], [T], or [BT] can be set for the shutter
speed.
Shutter Speed
B Exposure is continued while z is pressed, and canceled when
Bulb the button is released.
T Exposure is started when z is pressed, and ended when the
Time button is pressed again.
BT
Exposure is started when z is pressed, and ended after the set
Bulb timer time has elapsed.
Set the exposure time using r.
• [B] and [T] are available when [Drive Mode] is set to [Single Frame Shooting] or [Multi-exposure],
and [BT] is available when [Drive Mode] is set to [Single Frame Shooting], [Multi-exposure], [Interval
Shooting], or [Interval Composite].
• Operation is also possible using the optional cable switch (CA-2) in place of z.
• [One Push AE in M Mode] in [Fn Button Setting] of the D2 menu does not work.
BT F5.6 800
Operation
100
3
51
2018/08/07 10:01:03