SpringWell WS1 Installation Instructions Manual page 6

Install Bypass
Note: This is the point where you will install the system into your main
plumbing. This system should be installed before water softeners,
chlorinators, etc. This system should be installed after sediment filters, or
neutralizing filters. (calcite, corosex)
Determine the area where you want to install your system. Be sure there is an
electrical outlet for the electronic head. Follow the arrows on top of the bypass
valve to determine the flow of the water. Adapt your plumbing in and through the
head.
Now finish by plumbing back into your main water supply.
(Example using SharkBite Fittings)
6