Light; Beep; Vox - Radioddity FS-T1 User Manual

5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.

LIGHT

Procedure 3.4 setting light
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-04:LIGHT
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select:ON/OFF/KEY
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.
Note:
ON: the backlight is long bright;
OFF: the backlight is off.
KEY: the backlight is turned on by the button, and the button will automatically turn off for a while.

BEEP

Allows audible confirmation of a key press, if you want to turn off the beep tone via following the
steps.
Procedure 3.5 setting BEEP
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-05: BEEP
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: ON/OFF
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.
VOX (Voice Operated Transmission)
VOX eliminates the need to manually switch to transmission mode each time you want to
transmit. When the VOX circuit detects that you have started speaking into the microphone,
the transceiver automatically switches to transmission mode.
1. When operating the VOX function, be sure to set the VOX gain level which allows the
transceiver to recognize the sound levels.
2. If the microphone is too sensitive, the transceiver will begin transmitting when there is noise
in the background.
If it is not sensitive enough, it will not pick up your voice when you begin speaking. Be sure to
adjust the VOX gain level to an appropriate sensitivity to allow smooth transmission.
Procedure 3.6 setting VOX
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-06: VOX