Sony SU-B461S Instructions Manual page 10

Recommended measures to
secure the TV and the TV Stand
Consider the following measures when securing your
TV to a board (not supplied).
1 Secure the board for the TV.
Make sure the board can adequately support the
weight of the TV. Use two angle braces (not
supplied) to secure the board. For each angle brace
use the appropriate hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the board.
2 Secure the TV to the board.
Use the optional hardware listed below (not
supplied):
• M4 × 16 machine screw (screwed into the TV Stand)
• A screw or similar (attach it to the board)
• Rope or chain (strong enough to support the weight
of the TV). Make sure that there is no excess slack in
the rope or chain.
An alternative way to secure the TV is with an optional
Sony Support Belt Kit.
M4 × 16
Screw hole
machine
on the TV
screw (not
Stand
supplied)
Rope or
Screw
chain (not
(not supplied)
supplied)
~
Contact Sony Customer Support to obtain the optional
Support Belt Kit by providing your TV Stand model name
(SU-B551S/461S).
• For United States call: 1-800-488-7669 or visit:
www.sony.com/accessories
• For Canada call: 1-877-899-7669
10
(US)
Angle brace
(not supplied)
Board
3 Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
~
• TV SET is shipped with screws attached to the rear of the
TV. (They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two screws prior to
anchoring the TV on a wall.
• Securing the TV to the board without securing the TV and
the board to the wall provides minimum protection against
the TV toppling over. For further protection, be sure to
follow the three measures recommended.
Anchor bolts (M6, not supplied)
Rope or chain
(not supplied)
Wall-anchor
(not supplied)
Wall-
mount
holes