Suzuki GSX-R150 Owner's Manual page 40

Change of ID Code
ID code can be changed to optional figures
(new ID code).
1. Immediately after checking ID code,
push the main switch knob for 3 seconds
and release. If the knob is not released
within 5 seconds, the system does not
enter in ID code change mode.
2. The keyless indicator light comes on and
stays for 10 seconds and then goes out.
3. The keyless indicator light blinks one
time.
4. Within 5 seconds after finishing blinking
of the keyless indicator light, push the
main switch knob the number of times
corresponding to 1st digit of new ID code
for registration.
5. To tell the input in the above step, the
keyless indicator light blinks the regis-
tered times.
6. The keyless indicator light comes on and
stays for about 3 seconds and then goes
out.
7. The keyless indicator light blinks two
times.
8. Within 5 seconds after finishing blinking
of the keyless indicator light, push the
main switch knob the number of times
corresponding to 2nd digit of new ID
code for registration.
9. Repeat the above steps up to the figure
of the 4th digit of new ID code.
10. When renewal of ID code to optional fig-
ures (new ID code) is completed cor-
rectly, hazard lights blink 2 times and the
keyless indicator light comes on and
stays for about 10 seconds.
2-26