Tuning Into A Station Automatically; Radio Operation; Labeling Stations - Sony HT-V600DP HTV600DP Operating Instructions (main amp/tuner for HTV) Operating Instructions Manual

Radio Operation (Continued)
For your reference
Weak FM stations
"STEREO" may flash when the weak FM stereo signal
is received, select another station.
To turn off the radio
Press @ / 1 to turn the DVD/VCR Receiver off or select
another function mode (DVD, VIDEO, etc).
To improve reception
Realign the antenna.

Tuning into a Station Automatically

1
Press TUNER FM/AM on the remote control or
on the front panel until the frequency band
appears on the display and TV screen.
2
Press CH/PRESET (+/–) on the remote control or
front panel to select the desired column.
If you select a blank column, R-SKIP appears in the
display window.
3
Press TUNER FM/AM on the remote control or
front panel to select the desired band.
4
Hold down TUNING (+/–) on the remote control
for 1 or 2 seconds, and a station is searched for
automatically.
5
Press MEMORY.
Note
The search may not stop at a station with a very weak
signal.

Labeling Stations

1
Press b to move to the station name column.
- - - - - - - RADIO - - - - - - - 2/6.
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
TUNER/BAND
MEMORY/CLEAR
2
Use the V/v buttons to select the character then
use the B/b buttons to shift to the next or previ-
ous character.
3
Press ENTER to confirm the station name.
4
Press MEMORY on the remote control.
The station name is stored.
TUNING +/-
39