Annex 2 - Db-15 Pin-Out On X6 Standard Interface; Annex 3 - Filling Up Coin Tubes - SEM 9900X Manual

Pin-out description on DB15 header on the standard X6 standard Inter-
face A06500).
Filling up the coin tubes.
The easiest way to fill up the coin tubes of your changer is to do as follow:
1. Insert coins into the coin slot just like a customer would do to
buy copies.
2. Once done,
will cancel the credit while adjusting the inventory. The display
will show Inventory updated. Saving, one moment please.
If you can't press on the black button because you do not have access. Un-
plug the coin-op from the wall and plug it back.
the display MUST show Welcome ! Insert Coins.
Filling the coin tubes this way serves two purposes: First, it adjusts the coin
inventory in the audit (see page 17). Second, you are testing the coin ac-
ceptance. If the unit starts rejecting all the coins you insert it is because you
have reached the maximum cash value set in the Value parameters (see
page 34). Press on the black button and continue.
Another method consists of going into the audit and start inserting your
coins like a customer would. Then step out of the audit. The display will
show Wait while initialization...
All coin changers on the market give full priority to filling up the coin tubes.
Only what is in excess will be diverted to the coin box. Please note that
some types of coin changers allow you to preset a value or a coin level in
the tubes. Please consult the instruction manual of the coin changer to set
such a value or coin level. The 9900X has no control on the coin level in the
tubes.
Annex 2
Annex 3
press on the BLACK button on the circuit. This
When you leave the place,
49