SEM 9900X Manual page 41

Vend Station is debit-
ing one copy upon
insertion of coins, bills
or card.
If the change returned
indicates the amount deb-
ited was a multiple of one
of the prices (2 x A, 3 x A,
the same for B), the Sta-
tion is probably detecting
more than one pulse for
one copy.
Coins are stuck in the
base of the coin mecha-
nism.
Coin tubes are empty.
Amount debited = price of
colour copy.
Defective coin changer.
Is your copier an old ana-
logical Minolta?
Other copiers
Make sure your connec-
tion is secured.
for the pulse blind. If the
blind is too short and if
the pulse from the copier
is bouncing, Vend Station
may see this as a genu-
ine pulse.
Remove coins. Be care-
ful not to damage the
coin changer.
Fill up the tubes to a safe
level.
Auto-Detect chosen on
the copier + the original
document has a trace of
colour on it. Therefore,
the copier has sent a col-
our signal but the cus-
tomer was expecting to
pay the B&W price thus
saying he did not get
proper change back.
Replace coin changer.
If YES, you must put Dis-
able Delay at 0,5 second.
Copier type wrongly set
(see page 27, Type 3).
Pulse is always ON in
copier, never goes OFF.
Check
41