By-Pass Limit; Sales Price Card 1 Or Hopper Value 1; Print Parameters -- # 5 Of 6 - SEM 9900X Manual

Bypass limit copies
The 9900X Vend Station limits the free copies made with the bypass key.
Enter that limit of free copies here. The maximum limit you can set is 999.
An 000 limit = unlimited. Each time the bypass key is turned, the display
shows how many copies are left in the count. Once the maximum reached,
a supervisor must erase the count in the audit menu.
Sales price card 1 or HOPPER 1 value
The X6 circuit equips both the 9900X and 9910X coin-op. The 9910X can
have either a built-in card dispenser or a coin dispenser hopper at the base.
The name of the parameter will vary depending the dispenser you have. Set
here the price of either the card or the token you are dispensing.
This concludes the Value Parameters setting.

Print parameters -- # 5 of 6

The Print parameters function is a very useful feature SEM offers you in this
payment device. It allows you to print and review the current settings of your
Vend Station. Printing is achieved via the DB9 serial port on the main board
(see page 13 for port location). If you have your own serial printer, set it at
9600, N, 8 1. If the printer is not correctly attached or configured, the display
will prompt a warning. Parameters can also be downloaded on Hyper-
terminal in Windows XP and lower or any other similar software available on
the Internet (requires SEM cable # A03330).
35