Sony HT-FS3 Operating Instructions Manual page 61

The S-AIR function
S-AIR connection is not established (sound
transmission is not established), e.g., the
indicator of the S-AIR sub unit turns off,
flashes, or turns red.
• If you use another S-AIR main unit, place it
more than 8 m (about 25 feet) away from the
S-AIR main unit you are using.
• Confirm that the S-AIR IDs of the
subwoofer and the S-AIR sub unit are the
same (page 51).
• Another S-AIR sub unit is paired to the
S-AIR main unit. Pair the desired S-AIR sub
unit with the S-AIR main unit (page 54).
• Place so that the S-AIR main unit and S-AIR
sub unit are separated from other wireless
devices.
• Avoid using any other wireless devices.
• The S-AIR sub unit is turned off. Make sure
the AC power cord (mains lead) is connected
and turn on the S-AIR sub unit.
No sound is heard from the S-AIR sub unit.
• If you use another S-AIR main unit, place it
more than 8 m (about 25 feet) away from the
S-AIR main unit you are using.
• Confirm that the S-AIR IDs of the
subwoofer and the S-AIR sub unit are the
same (page 51).
• Check the pairing setting (page 54).
• Place the S-AIR main unit and S-AIR sub
unit closer together.
• If you are using any equipment that
generates electromagnetic energy such as a
microwave oven near an S-AIR product, turn
off the equipment and try using the S-AIR
product again after waiting for a short time.
• Place so that the S-AIR main unit and S-AIR
sub unit are separated from other wireless
devices.
• Avoid using any other wireless devices.
• Change the "RF CHANGE" setting
(page 56).
• Change the S-AIR ID settings of the S-AIR
main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then
turn on them.
• Sources with copyright protection may not
be playable on S-AIR receivers.
• Wireless surround amplifiers cannot be used
with this system. The system does not
support S-AIR devices other than S-AIR
receivers.
There is noise or the sound skips.
• If you use another S-AIR main unit, place it
more than 8 m (about 25 feet) away from the
S-AIR main unit you are using.
• Place the S-AIR main unit and S-AIR sub
unit closer together.
• If you are using any equipment that
generates electromagnetic energy such as a
microwave oven near an S-AIR product, turn
off the equipment and try using the S-AIR
product again after waiting for a short time.
• Place so that the S-AIR main unit and S-AIR
sub unit are separated from other wireless
devices.
• Avoid using any other wireless devices.
• Change the "RF CHANGE" setting
(page 56).
• Change the S-AIR ID settings of the S-AIR
main unit and S-AIR sub unit.
Other
The remote does not function.
• Point the remote at the remote sensor
the front panel display.
• Remove any obstacles in the path between
the remote and the front panel display.
• Replace both batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on the
remote.
The volume turns down when the output
method changes from the TV speaker to the
system speaker.
• The Volume Limit function is working. For
details, refer to "Using the Volume Limit
function" (page 32).
in
continued
61
GB