Sony HT-FS3 Operating Instructions Manual page 54

2
Press X/x repeatedly until "SET S-AIR"
appears in the front panel display, then
press or c.
Note
• When the wireless transmitter is not inserted in
the subwoofer, "SET S-AIR" cannot be selected.
3
x/X
Press repeatedly until "S-AIR
STBY" appears in the front panel
display, then press
4
Press X/x to select the desired setting.
• "STBY ON": You can enjoy the S-AIR
receiver while the subwoofer is in standby
mode or turned on. The power
consumption during the standby mode
increases.
• "STBY OFF": You cannot enjoy the
S-AIR receiver while the subwoofer is in
standby mode.
5
Press .
The setting is made.
6
Press AMP MENU.
The AMP menu turns off.
Note
• When you turn the system off while "S-AIR STBY"
is set to "STBY ON," the POWER / ACTIVE
STANDBY indicator lights up in amber in the front
panel display.
54
GB
or c.
Identifying the subwoofer
with a specific S-AIR sub unit
(Pairing operation)
It is easy to set the same ID for the subwoofer
and an S-AIR sub unit to establish sound
transmission. However, neighbors may also
receive your system's sound if IDs are the same,
or you may receive sound from neighbors. To
prevent this, you can identify the subwoofer with
a specific S-AIR sub unit by performing the
pairing operation.
x Before pairing
Sound transmission is established by ID
(example).
Your room
This subwoofer
ID A
ID A
S-AIR sub unit
Neighbor
ID A
S-AIR sub unit