Table of Contents
Advertisement
Installation Instructions
Safety precautions for installation
WARNING
Follow these instructions when
installing the Ceramic Hob.
If it is installed improperly, it may
cause electric leakage or overheat.
Install a dedicated circuit of 3 phase
400 V / 16 A or single phase
220 - 240 V / 32 A, with a power
switch for power supply.
If dedicated circuit is not connected
compatibly, it may cause abnormal
heat on electrical wiring.
Electrical work should be done by
a qualified electrician.
If the connection or repair is not
completed, it may cause electric
leakage or overheat.
Install the ground completely with
related law.
Installation of ground can avoid
electric shock if electric leakage
occurs
18
Please observe these precautions fully
Failure to follow these instructions may
cause a risk of personal injury or death.
The ground should be installed by
a qualified electrician.
If the installation is not proper,
electric leakage may occur.
The means for disconnection must
be incorporated in the fixed wiring
in accordance with the wiring
rules.
This appliance is necessary to
allow disconnection from the
supply after installation. The
disconnection may be achieved
by having the plug accessible or
by incorporating a switch in the
fixed wiring in accordance with the
wiring rules.
Never disassemble, repair or
modify the Ceramic Hob.
Any attempt to do so may cause the
Ceramic Hob to operate abnormally
and may result in danger.
For Installer
Hide quick links:
Advertisement
Table of Contents
