For Installer; Installation Instructions - Panasonic KY-R647EL Operating And Installation Instructions

Installation Instructions

Follow these instructions when installing the unit� Improper installation may
cause electric leakage or overheat�
Connect to a 208/220-240 V, 32 A or over single phase power supply�
WARNING
Follow these instructions when
installing the unit�
If it is installed improperly, it may
cause electric leakage or overheat.
Install a dedicated circuit of single
phase 208/220-240 V / 32 A or over,
with an isolating switch for power
supply�
If dedicated circuit is not connected
compatibly, it may cause abnormal
heat on electric wires.
Electrical work should be done by
a qualified electrician�
If the connection or repair is not
completed, it may cause electric
leakage or overheat.
Install the ground completely with
related law�
Installation of ground can avoid
electric shock once electric leakage
occurs
EN-22
WARNING
Failure to follow these instructions may cause
a risk of personal injury or death�
The ground should be installed by
a qualified electrician�
If the installation is not proper,
electric leakage may occur.
The means for disconnection
must be incorporated in the fixed
wiring in accordance with the
wiring rules�
This appliance is necessary to
allow disconnection from the
supply after installation� The
disconnection may be achieved
by having the plug accessible or
by incorporating a switch in the
fixed wiring in accordance with
the wiring rules�
Never disassemble, repair or
modify the unit�
Any attempt to do so may cause the
unit to operate abnormally and may
result in danger.

For Installer