Panasonic Lumix DC-FZ10002 Basic Operating Instructions Manual page 79

Subject appears skewed in pictures.
• If you take a picture of a moving subject in the electronic shutter mode, motion picture recording
mode, or 4K photo recording mode, the subject in the picture may be skewed in some cases.
This is characteristic of MOS sensors which serve as the camera's pickup sensors. This is not a
malfunction.
Brightness or colouring of recorded picture different from real life.
• When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may
introduce slight changes to brightness and colour. These are a result of the characteristics of the
light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent lighting, LED
lighting fixture, mercury lamp, sodium lighting etc., the colours and screen brightness may change
or horizontal striping may appear on the screen.
4K photo recording stops before finishing.
• When the ambient temperature is high or recording of the 4K Photo function is performed
continuously, the camera may display [
down.
Cannot record motion pictures.
• When a large capacity card is used, you may not be able to take a picture for a while after you turn
on the camera.
Motion picture recording stops midway.
• When the ambient temperature is high or motion picture is recorded continuously, the camera may
display [ ] and stop the recording. Wait until the camera cools down.
• The speed class of a required card varies depending on [Rec Format] and [Rec Quality] of a motion
picture. Be sure to use a card of the recommended speed class (→11).
Sometimes focus adjustment with Auto Focus mode is difficult while recording 4K motion
pictures.
• This may occur when taking a picture by reducing the Auto Focus speed in order to adjust the
focus at high precision. This is not a malfunction.
No flash emitted.
• The flash becomes unavailable in the following cases.
– The flash is closed. (→47)
– Flash set to [
• The flash is fixed to [
– During motion picture recording
– When recording 4K photos
– When recording using [Post Focus]
– When using the electronic shutter
– When [HDR] is set to [ON]
– When [Silent Mode] is set to [ON]
– When a picture effect in [Filter Effect] of [Filter Settings] is set
• Set [Shutter Type] to [AUTO] or [MSHTR]. (→55)
• Set [Silent Mode] to [OFF]. (→55)
] (Forced Flash Off).
] (Forced Flash Off) in the following cases:
] and stop the recording. Wait until the camera cools
Others
DVQX1795 (ENG)
79