Panasonic Lumix DC-FZ10002 Basic Operating Instructions Manual page 46

Recording
Exposure Bracket
■
About [More Settings] (step
[Step]
[Sequence]
[Single Shot Setting]

Not available for burst recording. When using burst recording, if you press and hold the shutter
button, recording will be performed continuously until a specified number of pictures are taken.
●
When taking pictures using Exposure Bracket after setting the Exposure Compensation value, the
pictures taken are based on the selected Exposure Compensation value.
Aperture Bracket
Recording mode:
■
About [More Settings] (step
[Image Count]
• When using burst recording, if you press and hold the shutter button, recording will be
performed until a specified number of pictures are taken.
Focus Bracket
■
About [More Settings] (step
[Step]

[Image Count]
[Sequence]

Not available for burst recording. When using burst recording, if you press and hold the shutter
button, recording will be performed continuously until a specified number of pictures are taken.
●
Pictures taken with Focus Bracket are displayed as a set of group pictures.
46
DVQX1795 (ENG)
in (→45))
2
Sets the number of pictures to be taken and the exposure compensation
range.
[ ] (Takes three pictures with an interval of 1/3 EV) to [
(Takes seven pictures with an interval of 1 EV)
Sets the order in which pictures are taken.
[ ]: Takes one picture each time you press the shutter button.

[ ]: Takes all the pictures set to be taken when you press the shutter
button once.
in (→45))
2
[3]/[5]: Takes a specified number of pictures with different aperture
values within the range based on the initial aperture value.
[ALL]: Takes pictures using all aperture values.
in (→45))
2
Sets the interval between focus positions.
Sets the number of pictures to be taken.
[0/–/+]: Takes pictures with different focus positions within the range
based on the initial focus position.
[0/+]: Takes pictures with different focus positions toward the far side
based on the initial focus position.
]