Panasonic Lumix DC-FZ10002 Basic Operating Instructions Manual page 73

Playing back or saving images stored on the camera, or
uploading them on social media sites
Wireless connectivity required:
Connect to a smartphone (→70)
1
Operate the smartphone
2
If the camera is already connected to the smartphone via Bluetooth, select [
operation].
(iOS devices) When you need to change the connected device on the Wi-Fi setup screen, follow
the on-screen message to change the setting.
Select [ ]
• You can switch a device of pictures to be displayed using the icon
at the top left on the screen. Select [LUMIX] to display a picture
saved in the camera.
(Playing back a picture)
When the picture is touched, it is played back at a larger
size
(Saving and sending pictures to web services such as
SNS)
Press and hold the picture and drag it
Writing location information of a smartphone on a recorded
image
Wireless connectivity required:
The smartphone sends its location information to the camera via Bluetooth, and the
camera performs recording while writing the acquired location information.
Preparation
Enable the GPS function on the smartphone.
Make a Bluetooth connection to the smartphone (→68)
1
Select the camera's menu
2
→ [Setup] → [Bluetooth] → [Location Logging] → [ON]
• The camera will enter a mode where location information can be recorded and [
displayed on the recording screen.
Take pictures on the camera
3
• Location information will be written to the recorded pictures.
●
When the displayed [
be written.
Wi-Fi
Bluetooth
] is semi-transparent, location information is not acquired, so data cannot
Wi-Fi/Bluetooth
] → [Remote
] will be
DVQX1795 (ENG)
73