Connecting The Antenna (Aerial) - Sony DAV-LF1H Operating Instructions Manual

4 Connecting the Antenna (Aerial)

To connect the AM antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
Remove only the loop part.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected to either terminal.
Note
• Do not place the AM loop antenna (aerial) near the system or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
To connect the FM wire antenna (aerial)
Connect the FM wire antenna (aerial) to the FM 75
FM wire antenna (aerial)
(supplied)
FM 75
Note
• Be sure to fully extend the FM wire antenna (aerial).
Insert until this
part.
A
B
or
COAXIAL jack
A M
Insert the cords pushing
down the terminal clamp.
COAXIAL jack.
FM wire antenna (aerial)
(supplied)
FM 75 COAXIAL jack
continued
25
US