Sony DAV-LF1H Operating Instructions Manual page 39

To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on PC displays).
Connecting the TV with the digital optical cord
The TV with the digital optical out jack (such as the TV that has digital satellite tuner, etc.) can be
connected to the TV (DIGITAL IN OPTICAL) jack instead of the TV (AUDIO IN) jacks of the rear of
the subwoofer.
The system can accept both the digital and analog signals. Digital signals have priority over analog
signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
TV with the optical digital jack
OPTICAL
DIGITAL
OUT
To the optical
digital output jack
Tip
• When connecting the digital optical cord, insert the connector until it clicks.
Rear of the subwoofer
ECM-AC1 TV VIDEO 1 VIDEO 2 TV VIDEO 1
AUDIO IN AUDIO IN AUDIO IN DIGITAL IN
L
VIDEO 2
OPTOCAL
R
DIGITAL IN
COAXIAL
DIGITAL
IN
COAXIAL
39
US