Sony DAV-LF1H Operating Instructions Manual page 99

9
Press X/x repeatedly to select [TEST
TONE], then press
10
Press X/x repeatedly to select [OFF],
then press .
Note
• When you adjust the speaker settings, the sound cuts
off for a moment.
• The test tone signals are not output from the HDMI
OUT jack.
.
Placing the surround speaker
(L) in the (R) position
Depending on the location of the wall outlet
(mains), you can also place the surround speaker
(L) (with the IR receiver) in the (R) position if
necessary.
X/x/c,
With the cover opened.
1
Press AMP MENU.
2
Press X/x repeatedly until "SL SR
REVERSE" appears in the front panel
display, then press
3
Press X/x to select the setting.
The default setting is underlined.
• OFF: Sets the surround speaker (L) (with
the IR receiver) in the (L) position.
• ON: Sets the surround speaker (L) (with
the IR receiver) in the (R) position.
4
Press .
5
Press AMP MENU.
The AMP menu turns off.
AMP MENU
or c.
99
US