Test Tone - Sony DAV-SB500W Operating Instructions Manual

x LEVEL
You can vary the level of each speaker as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
CENTER
0 dB
(appears when
you set
[CENTER] to
[YES] in the
[SIZE] setting.)
SURROUND
LEFT 0 dB
SURROUND
RIGHT 0 dB
(appears when
you set
[SURROUND] to
[YES] in the
[SIZE] setting.)
SUBWOOFER
+4 dB
* When you perform the Quick Setup (page 27), the
default settings are changed.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set [TEST
TONE] to [ON] for easy adjustment.
FRONT
Adjusts the balance between the front
(CENTER)
left and right speakers. The center
position is shown as "---". (You can
adjust from the center 6 steps left or
right.)
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOLUME +/–.
x TEST TONE
The speakers will emit a test tone to adjust
[LEVEL] and [BALANCE].
OFF
The test tone is not emitted from the
speakers.
ON The test tone is emitted from both left and
right speakers simultaneously while
adjusting balance. When you select one of
the [SPEAKER SETUP] items, the test
tone is emitted from each speaker in
sequence.
GB
76
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
Adjusts the level of the surround
speakers (–6 dB to +6 dB, 1 dB
increments).
Adjusts the level of the subwoofer
(–6 dB to +6 dB, 1 dB increments).
Adjusting the speaker
balance and level by using the

test tone

1
Press DVD SETUP in stop mode.
The Setup Display appears.
2
Press X or x repeatedly to select
[SPEAKER SETUP], then press ENTER.
3
Press X or x repeatedly to select [TEST
TONE], then press ENTER.
4
Press X or x repeatedly to select [ON],
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5
From your listening position, adjust the
value of [BALANCE] and [LEVEL] using
C/X/x/c.
When selecting [BALANCE], the test tone
is emitted from both left and right speakers
simultaneously.
When selecting [LEVEL], the test tone is
emitted from only the speaker which you
are adjusting.
6
Press ENTER when you have finished
making adjustments.
7
Press X or x repeatedly to select [TEST
TONE], then press ENTER.
8
Press X or x repeatedly to select [OFF],
then press ENTER.
Note
When you adjust the speaker settings, the sound cuts
off for a moment.
Tip
To adjust the balance or the level without listening to
the test tone, select [BALANCE] or [LEVEL] in step 3
and press ENTER. Then adjust the balance or level
using X/x and press ENTER.