Table of Contents
Advertisement
About the surround amplifier
After connecting, you can attach the cover to the surround amplifier for organizing and storing excess
speaker cords.
Attaching the cover
1
Attach the speaker cord cover by
sliding it down along the grooves at the
edges of the surround amplifier.
Surround amplifier
Push the speaker cord cover down until you
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
2
Insert the tabs of the speaker cord
holder in the slots of the speaker cord
cover, and press it into place.
Surround amplifier
GB
16
Speaker cord cover
Grooves
Speaker cord holder
Tabs
3
Secure the speaker cord holder with
the supplied screw.
Notes
• Do not use the speaker cord cover and holder without
the supplied screw.
• Before detaching the speaker cord cover, first remove
the screw, then the speaker cord holder. Forcing the
speaker cord cover off with the screw in place may
cause damage.
• Gently pull apart the side of the speaker cord cover
when detaching.
Screw
Hide quick links:
Advertisement
Table of Contents
