Narrows the DYNAMIC range of the sound
track.
Useful for watching movies at low volume late
at night.
AUDIO DRC
DRC OFF: No compression of
DYNAMIC range.
DRC STD: Reproduces the sound
track with the kind of DYNAMIC
range that the recording engineer
intended.
DRC MAX: Fully narrows the
DYNAMIC range.
Note
DYNAMIC range compression only applies to Dolby
Digital sources.
Adjusting the speaker
balance and level by using the
test tone
1
Press AMP MENU.
2
Press X/x until "LEVEL" appears in the
front panel display, then press ENTER
or c.
The system enters the Level Menu mode.
3
Press X/x repeatedly to select
"T.TONE" in the front panel display,
then ENTER or c.
4
Press X or x to select "T.TONE ON" in
the front panel display.
You will hear the test tone from each
speaker in sequence.
When you select "T.TONE OFF," this
operation will be canceled.
5
Press C to return "T.TONE".
6
Press X/x to select the item you want to
set, then press ENTER or c.
7
Press X/x to adjust the speaker setting
value.
Press C to return step 6 and follow steps 6
and 7 to adjust other speaker setting values.
8
Set "T.TONE" to "T.TONE OFF" to
cancel the test tone function.
Test tone sound stops emitting.
9
Press AMP MENU when you have
finished making adjustments.
Note
When you adjust the speaker settings, the sound cuts
off for a moment.
27
US