Stb Synchro - Sony DAV-IS10 Operating Instructions Manual

6
Press X/x to select [STB SYNCHRO], then press
7
Press X/x to select [ON].
The default setting is underlined.
• [ON]: sets the [STB SYNCHRO] function to on.
• [OFF]: sets the [STB SYNCHRO] function to off.
8
Press .
[DIGITAL IN] setting is selected automatically.
CUSTOM SETUP
HDMI CONTROL:

STB SYNCHRO:

TV OPT, SAT/CABLE COAX
DIGITAL IN:
TV OPT, SAT/CABLE COAX
PAUSE MODE:
TV COAX, SAT/CABLE OPT
TRACK SELECTION:
MULTI-DISC RESUME:
AUDIO DRC:
AUDIO (HDMI):
9
Press X/x to select a setting depending on the coaxial or optical cord (C).
The default setting is underlined.
• [TV t OPT, SAT/CABLE t COAX]: Optical audio input signals are assigned to "TV"
function, coaxial audio input signals are assigned to "SAT/CABLE" function.
• [TV t COAX, SAT/CABLE t OPT]: Coaxial audio input signals are assigned to "TV"
function, optical audio input signals are assigned to "SAT/CABLE" function.
10
Press .
The setting is made.
Tip
• You can operate this function on STB or a digital satellite receiver which is not compatible with HDMI CONTROL
function.
Note
• Depending on the TV, this function may not work when STB or a digital satellite receiver is connected to the HDMI
1 jack of the TV.
Enjoying digital sound
Select the HDMI input of your TV connected to the STB or digital satellite receiver (HDMI 1
shown above).
The system accepts the signal from the SAT/CABLE (DIGITAL IN COAXIAL or OPTICAL) jack
automatically and outputs the sound of the STB or digital satellite receiver from the speakers of the
system.
ON
ON
ON
OFF
OFF
.
47
US